BREMBO RACING CALIPER OFFROAD XQ21361
Body in CNC aluminum alloy with hard anodized finish. Mounting bracket in forged aluminum. 2 pistons with diameter 28 Pistons and titanium hardware. Code XQ21361
BREMBO RACING OFFROAD DISC
Born from the experience gained in the MX1 World Championship, the MX-terra disc is recognizable by the coupling between the stainless steel band and the CNC bell in aluminum alloy machined from solid obtained through six drive pawls. This solution…
BREMBO RACING REAR CALIPER X206101
Body made of CNC aluminum alloy, hard anodized. 4 pistons 24 Pistons and titanium hardware Code X206101
BREMBO RACING REAR CALIPER X206001
Body made of CNC aluminum alloy, hard anodized. 2 pistons 24 Pistons and titanium hardware Code X206001
BREMBO RACING REAR CALIPER CNC SUPERSPORT WITH BRACKET
The kit, made from CNC collet 120A4411X and from the special bracket is mounted on some Japanese Supersport. See catalog for applications list
BREMBO RACING REAR CALIPER BRACKET WITH CAST SPORT
The kit, consisting of the caliper merged 120B27810 and from the special bracket is mounted on some Japanese Supersport. See catalog for applications list
BREMBO RACING PURR REAR SPORT CALIPER 120B27810
This caliper achieved through an aluminum casting alongside, not replace, the code CNC model 120A44.10 / .30 / .40. The gripper, with pistons 34, has a titanium-colored finish, with Brembo logo obtained by laser engraving. It mounts on European sport…
BREMBO RACING MOTARD RADIAL CALIPER XA3B860/61 XA3B830/31
Body in CNC aluminum alloy with hard anodized finish. 4 pistons 32/36 Wheelbase 108 mm . Off-set 22.5 mm . It must be used with Brembo discs to lower-end Code XA3B860/61 with aluminum pistons and steel fasteners Code XA3B830/31 with pistons…
BREMBO RACING MOTARD RADIAL CALIPER XA69510/11 XA78910/11
Body in CNC aluminum alloy with hard anodized finish. Aluminum pistons and steel fasteners 4 pistons 30/34 Code XA78910/11 wheelbase 100 mm. Off-set 30 mm. Code XA69510/11 wheelbase 108 mm. Off-set 22,5 mm.
BREMBO RACING MONOBLOC RADIAL CALIPER FOR R1 07-14 XA8Y310/11
Specific monobloc calipers for Yamaha R1 2007/'14 per Yamaha R1 2007/'10 (with 6 pistons caliper ) Body in CNC aluminum alloy with hard anodized finish. 4 pistons 34/38 Titanium pistons Code XA8Y310/11
